Settings Screen

This section includes a list of settings you can configure for a customized Deltek Touch experience.

General

Field	Description
Username	This field displays your username. To change the current user, tap Forget me on this device, and then log in again.
Open In	This field displays the default screen when you open Deltek Touch. The available screens may vary according to your app version. Select any screen you prefer. By default, the application opens on the Timesheet screen.
Log in using Fingerprint (in some Android devices, Log in using Fingerprint/Face)	Toggle the switch on to enable logging in with fingerprint recognition or face authentication. This setting is off by default. Note: Face ID authentication is supported on some Android devices. However, due to an Android operating system issue, face recognition may not work on all devices. You can still opt to use PIN or fingerprint authentication to log on to Deltek Touch.
Use ICR for Expenses	Toggle the switch on to enable expense entry automation using Quick Capture with intelligent character recognition (ICR). This setting is off by default.

Timesheet

Field	Description
Submit Mode	This field displays the mode used in viewing and submitting timesheets. The Daily mode allows you to submit timesheets one day at a time, whereas the Weekly mode allows you submit timesheets for the entire week.
Week Start	This field is available when the Submit Mode is set to Daily. Tap the field and select the first day of the week on the Calendar and Timesheet screens. You can select either Sunday or Monday.
Registration Unit	This field is available when the Submit Mode is set to Weekly. Tap the field, and select any of the following minute intervals: 1 minute (0-59) 2 minutes 5 minutes 10 minutes 15 minutes 30 minutes Tenths (0, 6, 12, 18, etc.)
Use Week Numbers	For REST, this setting is available when the Submit Mode is set to Weekly. Toggle the switch on to display the week number on the Weeks, Timesheet, and Summary screens.
Keep on Timesheet as Default	By toggling the switch on, the Keep on Timesheet switch on the Timesheet Line screen is turned on by default when adding a new line.
Refresh When Opening	Toggle the switch on to enable automatic updates to the Timesheet screen upon opening. This is recommended if you frequently use timesheets, and prefer to obtain real-time data. This setting is off by default.

Menu

Field	Description
Expense Sheet	Toggle the switch on to display Expense Sheet and Quick Capture on the sliding menu.
Mileage Sheet	Toggle the switch on to display Mileage Sheet on the sliding menu.
Purchase Order	Toggle the switch on to display Purchase Order on the sliding menu.
Absence Requests	Toggle the switch on to display Absence Requests on the sliding menu.
Allowance Requests	Toggle the switch on to display Allowance Requests on the sliding menu.
Rejections	Toggle the switch on to display Rejections on the sliding menu. This setting is only available in REST.
Approvals	Toggle the switch on to display Approvals on the sliding menu. This setting is off by default.

Approvals

Field	Description
Substitute	Toggle the switch on to display all items for substitute approvals. This setting is off by default.
Include Substitute Approvals in Counters	Toggle the switch on to include the number of items for substitute approvals in the counter. This setting is off by default.
Batch Approvals	Toggle the switch on to enable the approval of items by batch. This setting is off by default.

Information

Field	Description
Privacy Policy	Tap to access the Deltek Privacy Policy page, which contains legal notices and privacy information.
About	Tap to view the device and operating system information, which includes the following: Device Type Operating System User Agent Application version (Web App or Native App) Touch Sever version Web Service version Core System version Touch Server Build version Web App Build version Tap Email Info to send this information to a specified email address. This information may be requested by Deltek Support Services if you encountered and reported an issue with the application.
Forget me on this device	Tap to remove the server URL, and your user credentials from the application. On your next login, you are required to enter your organization’s Deltek Touch URL, username, and password.
Reset settings to default	Tap to clear all user settings from your device’s local storage. When you tap this option, you are required to log on again. After authentication, all user settings are reset to the default values.

JavaScript must be enabled in order to use this site.Please enable JavaScript in your browser and refresh the page.

Settings Screen

This section includes a list of settings you can configure for a customized Deltek Touch experience.

General

Field	Description
Username	This field displays your username. To change the current user, tap Forget me on this device, and then log in again.
Open In	This field displays the default screen when you open Deltek Touch. The available screens may vary according to your app version. Select any screen you prefer. By default, the application opens on the Timesheet screen.
Log in using Fingerprint (in some Android devices, Log in using Fingerprint/Face)	Toggle the switch on to enable logging in with fingerprint recognition or face authentication. This setting is off by default. Note: Face ID authentication is supported on some Android devices. However, due to an Android operating system issue, face recognition may not work on all devices. You can still opt to use PIN or fingerprint authentication to log on to Deltek Touch.
Use ICR for Expenses	Toggle the switch on to enable expense entry automation using Quick Capture with intelligent character recognition (ICR). This setting is off by default.

Timesheet

Field	Description
Submit Mode	This field displays the mode used in viewing and submitting timesheets. The Daily mode allows you to submit timesheets one day at a time, whereas the Weekly mode allows you submit timesheets for the entire week.
Week Start	This field is available when the Submit Mode is set to Daily. Tap the field and select the first day of the week on the Calendar and Timesheet screens. You can select either Sunday or Monday.
Registration Unit	This field is available when the Submit Mode is set to Weekly. Tap the field, and select any of the following minute intervals: 1 minute (0-59) 2 minutes 5 minutes 10 minutes 15 minutes 30 minutes Tenths (0, 6, 12, 18, etc.)
Use Week Numbers	For REST, this setting is available when the Submit Mode is set to Weekly. Toggle the switch on to display the week number on the Weeks, Timesheet, and Summary screens.
Keep on Timesheet as Default	By toggling the switch on, the Keep on Timesheet switch on the Timesheet Line screen is turned on by default when adding a new line.
Refresh When Opening	Toggle the switch on to enable automatic updates to the Timesheet screen upon opening. This is recommended if you frequently use timesheets, and prefer to obtain real-time data. This setting is off by default.

Menu

Field	Description
Expense Sheet	Toggle the switch on to display Expense Sheet and Quick Capture on the sliding menu.
Mileage Sheet	Toggle the switch on to display Mileage Sheet on the sliding menu.
Purchase Order	Toggle the switch on to display Purchase Order on the sliding menu.
Absence Requests	Toggle the switch on to display Absence Requests on the sliding menu.
Allowance Requests	Toggle the switch on to display Allowance Requests on the sliding menu.
Rejections	Toggle the switch on to display Rejections on the sliding menu. This setting is only available in REST.
Approvals	Toggle the switch on to display Approvals on the sliding menu. This setting is off by default.

Approvals

Field	Description
Substitute	Toggle the switch on to display all items for substitute approvals. This setting is off by default.
Include Substitute Approvals in Counters	Toggle the switch on to include the number of items for substitute approvals in the counter. This setting is off by default.
Batch Approvals	Toggle the switch on to enable the approval of items by batch. This setting is off by default.

Information

Field	Description
Privacy Policy	Tap to access the Deltek Privacy Policy page, which contains legal notices and privacy information.
About	Tap to view the device and operating system information, which includes the following: Device Type Operating System User Agent Application version (Web App or Native App) Touch Sever version Web Service version Core System version Touch Server Build version Web App Build version Tap Email Info to send this information to a specified email address. This information may be requested by Deltek Support Services if you encountered and reported an issue with the application.
Forget me on this device	Tap to remove the server URL, and your user credentials from the application. On your next login, you are required to enter your organization’s Deltek Touch URL, username, and password.
Reset settings to default	Tap to clear all user settings from your device’s local storage. When you tap this option, you are required to log on again. After authentication, all user settings are reset to the default values.