Project Summary Options Tab
Use the Detail, Labor, and Expense options to decide which options appear on the report. Use the Budget Details to select a budget source. Use reporting amounts to specify the currency for the report.
Detail Options
This section applies to specific information about the selected report.
Field | Description |
---|---|
Single Line Summary | Select this check box to display a one-line summary for each project, phase, and task. |
Break Out Final Totals Section | Select this check box to display the final totals in separate lines for labor, overhead, and each type of expense. If you do not select this check box, the report displays the final totals in a single line. |
Use Summary Table (Refresh Under Utilities > Updates) | Calculations performed for this report place high demands on processor resources. In some cases, it can take a long time to generate the report for large databases. Select this option to minimize the time it takes to generate the report. |
Contract Status | Use this field to select records for the report based on the customizable contract status options used by your organization. On the Contract Status lookup, click to select one or more of the status settings available, such as Approved & Signed, Negotiation, Pending, Rejected, and Sent for Signature, or others. |
Contract Type | Use this field to select records for the report based on contract type. On the Contract Type lookup, click to select one or more types, such as Additional Services, Change Order, Letter of Agreement, Original, or others. |
Exclude Contracts Not Included in Fees | Select this check box to exclude contracts for which
Include in Fees is not selected on the Contract tab of the Contract Management form ( ).
This report option is only available if the Synchronize Contract Values to Project Compensation option is selected on the General tab of the Contract Management settings form ( ). |
Labor Options
Use the Labor options to define whether or not unposted labor, overhead, and estimated overhead amounts are included. You can also specify the labor detail content and the drill-down level that is included.
Field | Description |
---|---|
Include Unposted Labor |
Select this option to include hours from unposted timesheets:
Vantagepoint uses extensions for cost and billing rates to calculate unposted labor amounts when timesheets are saved. |
Include Overhead |
Select this check box to include overhead amounts. Overhead is the sum of indirect labor and expenses and can represent 25% to 50% of all expenses incurred by your enterprise. Because overhead is a non-revenue producing charge type, it is only available if you set the Report At option to Cost. To see a true picture of project cost, you must set up overhead allocation to distribute the total cost of the overhead project among your regular, revenue-producing projects, so that each project absorbs its share of the total overhead cost. For more information, see Overhead Allocation. |
Estimate Overhead |
If you generate a report showing overhead but you have not yet allocated overhead for the current period, select this check box to use estimated overhead amounts. If you select this check box, Estimate Overhead displays at the top of the report. This option is only available if you set the Report At option to Cost. |
Labor Detail Content |
Specify how hours and amounts display in drill-down reports:
|
Labor Detail Drill Down Sort |
Specify how detail lines are sorted in drill-down reports:
|
Expense Options
Use the Expense options to limit the expenses included on the report.
Field | Description |
---|---|
Display Reimbursable Expenses | Select this check box to display reimbursable expenses. |
Display Direct Expenses | Select this check box to display direct expenses. |
Display Indirect Expenses | Select this check box to display indirect expenses. |
Display Reimbursable Consultant Expenses | Select this check box to display reimbursable consultant expenses. |
Display Direct Consultant Expenses | Select this check box to display direct consultant expenses. |
Include Committed Purchase Orders |
Select this check box to include as expenses any amounts committed to approved purchase orders. If you include committed expenses, you can see major upcoming costs that affect a project’s bottom line. If you also select the Committed Purchase Order Expense column on the Columns tab, the portion of the expenses for an account that is for committed purchase order expenses is displayed in a separate column as well as included in other expense amounts for the account. If you select this option and also set the Activity Period option to Current on the Activity tab, committed purchase order expenses are included whether or not the expense activity occurred in the current accounting period. |
Expense Drill Down Sorting |
Specify how expense detail lines are sorted in drill-down reports:
|
Budget Details
If you are using Project Planning, use the Budget Details to select the source of the project budget data, the calculation dates, and if the budget balance is included on the report.
Field | Description |
---|---|
Budget Source | Select one of the following settings as the source of the budget data for the report:
|
Choose Dates for Planning Calculations | If you select Project Planning Budget or Project Baseline Budget as the source of the budget data for the report, use this option to specify the date to be used in calculating estimate-to-complete (ETC) values: |
| |
Display Budget Balance when No Budget | Select this check box to display the difference between the budget and project-to-date billing or cost amounts even if there is no budgeted amount. The result is a negative amount unless the project-to-date amount is also zero or is a negative amount. |
Reporting Amounts
This section is only available if you are using multiple currencies. Use the options in this section to specify how the report displays the currency and exchange rate information related to an employee's project.
Field | Description |
---|---|
Report At |
Select one of the following rate options:
For more information about your access to either Cost or Burden rates and amounts, see Contents of the Labor Options Form. |
Report In | If you set the
Report At option to
Cost, specify one of the following currency types for displaying amounts on the report:
If you set the Report At option to Billing, specify one of the following currency types for displaying amounts on the report:
|
Report Activity Options
Use the Report Activity options to define how to report activity against the project. You can select to include a specific project level (project, phase, or task) that has transactions posted against it during a specific time frame.
Field | Description |
---|---|
Report Records with Activity in the Following Area | Use this option to the areas in which you want to report activity. Depending on your security role, you may have access to one or more of the following WBS levels:
|
Define Activity | Select the type of activity that you want to include on the report:
|
Find Activity in this Time Frame | Select the time frame for which you want to include activity:
|
Rollup Options
Use the Rollup Options to specify how to summarize all projects in the report based on part of the project number. For example, if you have related projects that have the same first 5 characters but 2 characters that are different at the end, you can slide the right arrow two places to the left to summarize information by the first 5 characters. The report displays a group header at the beginning of each group of projects and then lists each project in full detail. After the last project in the group, the report displays a group total. If there are associated phases and tasks, you can drag the slider for each level of the project to specify how to summarize those levels as well.
Field | Description |
---|---|
Project Number Rollup Options |
Use this option to summarize report information for projects that use a standard numbering system. For example, if the first five characters of your project number represent a master contract, you can summarize (roll up) information for all projects that have a common master contract number. The
Project Number Rollup slider box displays the number of characters in your (firm's) project numbers. For example, if you use a 10-digit project number, the slider box displays
123456790. A project number can also include up to two delimiters (such as, 12-345.67890).
To roll up, drag a slider to cover the characters that you want rolled up. You can drag a slider from the left side of the slider box, the right side, or both sides. |
Display Data As | If you set a project number rollup, use this option to select how you want to display the project data:
|
Phase Number Rollup Options |
Use this option to summarize report information at the phase level for phases that use a standard numbering system. This option is only available if you use phases. The Phase Number Rollup slider box displays the number of characters in your firm's phase numbers. For example, if you use a 7-digit phase number, the slider box displays 1234567. A phase number can also include one delimiter (such as 12345.12). You can roll up the phase number and still display information by task. When you do, a task total is the total of all occurrences of that task across the base project. For example, the total for Task 00001 is the total of all Task 00001s in the base project. To display only phases (and tasks), use the Project Number Rollup slider (box) to cover the project number completely. To roll up, drag a slider to cover the characters that you want rolled up. You can drag a slider from the left side of the slider box, the right side, or both sides. |
Task Number Rollup Options |
Use this option to summarize report information at the task level for tasks that use a standard numbering system. This option is only available if you use tasks. The Task Base Rollup slider box displays the number of characters in your firm's task numbers. For example, if you use a 3-digit task number, the slider box displays 123. This option works in the same way as the project and phase number rollup options. For example, if the first two characters of your task number represent a department, you can roll up information for all tasks that have the same department number. To display only tasks, use the Project Number Rollup and Phase Number Rollup sliders to cover the project number and phase number completely. To roll up, drag a slider to cover the characters that you want rolled up. You can drag a slider from the left side of the slider box, the right side, or both sides. |