Contents of the Manage Quality Control Inspections Screen

Use the fields and options to configure the Manage Quality Control Inspections screen.

Identification

Field	Description
Warehouse	If you use the Inventory module, enter, or click to select, a warehouse ID where this inspection is performed. If an existing inspection is accessed, this field displays the warehouse recorded on the purchase order receipt and is non-modifiable. If the inventory module is not enabled, this field should be left blank.
Inspection ID	Enter the inspection ID containing up to 10 alphanumeric characters. This field is required and is used throughout Costpoint to identify the inspection. If you do not use Inventory and the Auto-Assign Inspection/MRB IDs check box is selected on the Configure Receiving Settings screen, you can leave this field blank and an ID is assigned when you save the record. If you do use the Inventory module and view the Transaction IDs subtask of the Manage Warehouses screen, and see that the QC Inspection transaction type has been selected for the warehouse in this receipt and the Auto-Assign column is selected, the ID automatically displays when you save the record. The ID in this field cannot begin with a space. To update an existing inspection record, use to access the record.
PO Receipt	Enter, or click to select, the ID of the purchase order receipt being inspected. Click the Autoload button to display the receipt lines and other information associated with the specified ID in this field.
Insp Date	Enter the date on which the inspection transaction occurred. The date defaults to the system date, but can be modified.
Trans Currency	This displays the transaction currency used on the purchase order.
Packing Slip	This field displays the packing slip ID loaded in the purchase order receipt. If the PO Receipt field is blank, you can also click to select a packing slip.
Autoload	Click this button to load receipt lines to the inspection transaction.
Notes	Enter any notes you want to make about this inspection. Additional space for notes is available at the inspection line level.

PO Information

This group box displays the information identifying the purchase order whose receipts are being inspected.

Field	Description
PO	This field displays the purchase order ID against which the receipt was received.
Release	This field displays the release number of the purchase order, if it is a blanket release.
Change Order	This field displays the purchase order's change order number at the time it was received.
Vendor	This field displays the vendor name from the purchase order.
Buyer	This field displays the buyer assigned to this purchase order.
Organization	This field displays the buyer's organization ID.
Subcontract	This field displays the name of the subcontract associated with the PO. This also displays as a hyperlink to access the subcontract record on the Manage Subcontracts screen.

Note: The Subcontract field is available only to users who are licensed for CRM & Contracts.

Defaults

Field	Description
Inspector	Enter, or click to select, the inspector's employee ID to default on each inspection line. If you use to select the inspector's employee ID, all active employee IDs from the Manage Employee Information screen in Costpoint Employee are available for selection.
Rejection Location	Enter, or click to select, the location for the warehouse to use as the default for any rejected materials.
MRB Location	Enter, or click to select, the location for the warehouse to use as the default for any items placed into the Material Review Board (MRB) location.
Insp Report ID	Enter the inspection report ID to default on all inspection lines.

Table Window

Field	Description
PO Line	This field displays the number of the purchase order line.
Receipt Line	This field displays the receipt line number and cannot be modified.
Item	This field displays the received item ID.
Delivery Schedule Exists	If selected, this check box indicates that there are multiple delivery schedules that exist for the PO line. This check box is cleared and disabled for new lines.
Rev	This field displays the revision of the received item.
Description	This field displays the purchase order line description of the received item or miscellaneous line type.
Part Security	This field is visible only if the Use Part Data Security Controls check box is selected on the Configure Product Definition Settings screen, which indicates that the item is subject to data security restrictions, as defined in the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). If enabled, this field displays one of the following values to indicate whether the item you are accessing is subject to part data security restrictions and whether you have the necessary authorization to access information for that item: Unrestricted: The item is not subject to data security restrictions. Restricted: The item is subject to data security restrictions and that you are authorized to access detailed part information. ***UNAUTHORIZED***: The item is subject to data security restrictions and that you are not authorized to access or view part information. This value is displayed in red background color. If you are unauthorized to access parts or revisions that are subject to data security restrictions, then you will not be able to create or edit purchase order lines for that restricted part/revision. Note: The features in this release relating to Part Data Security are intended to assist your company in achieving ITAR compliance. However, it is each company’s responsibility to confirm that it is meeting its obligations with respect to ITAR or other applicable requirements. Deltek does not warrant that use of this functionality will result in compliance.
Type	This field displays the type of purchase order line which can be P (for parts), G (goods), S (services), or M (miscellaneous type) assigned to the purchase order line.
Misc Type	For miscellaneous line type, the line charge code for this purchase order line displays in this field.
PO U/M	This field displays the purchase order unit of measure recorded for this purchase order line.
Incoming Inspection Location	This field displays the Receiving Location entered on the Manage Purchase Order Receipts screen.
Received Qty (PO U/M)	This field displays the received quantity in the purchase order line unit of measure.
Undispositioned Qty (PO U/M)	This field displays the undispositioned (not accepted or rejected) quantity in the purchase order line unit of measure.
Inspection Report ID	Enter the inspection report ID for this inspection line.
Inspector	Enter, or click to select, the employee ID of the inspector performing this line's inspection.
AQL	Enter the Acceptance Quality Level (AQL) used to determine the sample inspection size (or 100% for full inspection). This is an optional field.
Inspected Qty (PO U/M)	Enter the quantity inspected (or a sample size), in the purchasing unit of measure for this inspection line. If you enter a quantity in this field and the purchase order line is for an inventory part, the quantity is automatically converted to the inventory unit of measure quantity and loaded in the Inspected Qty (Inventory U/M) (inventory unit of measure inspected quantity) field. The Inspected Qty cannot be greater than the Received Qty.
Accepted Qty (PO U/M)	Enter the total quantity accepted, in the purchase order unit of measure, for this inspection line (not just the quantity of sample size accepted). If you enter a quantity in this field and the purchase order line is for an inventory part, the quantity is automatically converted to the inventory unit of measure quantity and loaded in the Accepted Qty (Inventory U/M) (inventory unit of measure accepted quantity) field.
Rejected Qty (PO U/M)	This field displays the total rejected quantity in the purchase order unit of measure (not just the quantity of sample size rejected). This is the sum of the rejected quantities from the Rejection Info subtask.
Rej Qty Ret (PO U/M)	This field displays the rejected quantity marked as return to vendor or scrap in the purchase order unit of measure.
MRB Qty (PO U/M)	Enter the quantity, in the purchase order unit of measure, of the inspection line item sent to MRB for further review or inspection. If you enter a quantity in this field and the purchase order line is for an inventory part, the quantity is automatically converted to the inventory unit of measure quantity and loaded in the MRB Qty (Inventory U/M) (inventory unit of measure MRB quantity) field.
Acceptance Location	Enter, or click to select, the location where the accepted quantity has been placed (required for inventory parts if there is an acceptance quantity). This defaults from the default warehouse QC acceptance location or the preferred location for that part/project or part, depending on the selection in the Acceptance Location Default group box on the Configure Receiving Settings screen.
MRB Location	Enter the MRB location where the MRB quantity has been placed. This is required for inventory parts if there is an MRB Qty.
RMA Number	Enter the vendor's Returned Material Authorization (RMA) number, if material is to be returned to vendor. This is an optional field.
QC Insp Reqd	If this field displays Y, this item needs a separate quality control inspection when received. If this field displays N, no separate inspection is needed. The QC Insp Reqd status loads from the purchase order line and cannot be modified here.
Source Insp Reqd	If this field displays Y, this item needs to obtain approval from a government or customer inspector. If this field displays N, no such approval is needed. The Source Insp Reqd status loads from the purchase order line and cannot be modified here.
Cert Conf Reqd	If this field displays Y, the vendor needs to submit a certificate of conformance with the received item. If this field displays N, no such submission is needed. The Cert Conf Reqd status loads from the purchase order line.
Source Insp	Select the Source Insp check box if source inspection has been performed on the material on this inspection line.
Insp Type	This field displays the Inspection Type from the Manage Parts screen.
Inv Abbrev	This field displays the inventory abbreviation of the inventory part from the purchase order line and cannot be modified here.
Inventory Project	This field displays the inventory project of the inventory part from the purchase order line and cannot be modified here.
Prime Contract	This field displays the prime contract of the project to which this item was charged.
DPAS Rating	This field displays the Defense Priorities and Allocation System (DPAS) priority code of the project to which this item was charged. You can maintain this information in the Projects User Flow.
Inventory U/M	This field displays the inventory unit of measure.
Received Qty (Inventory U/M), Undispositioned Qty (Inventory U/M), Inspected Qty (Inventory U/M), Accepted Qty (Inventory U/M), Rejected Qty (Inventory U/M), Rej Qty Ret (Inventory U/M), MRB Qty (Inventory U/M)	Costpoint derives these fields by converting the purchase order quantities from the ordering unit of measure to the inventory unit of measure established for this part. Optionally, you can enter these fields in place of the purchase order unit of measure quantity fields, and Costpoint automatically converts them to the purchase order unit of measure quantities. These fields are disabled if the purchase order line is not an inventory part.
Order Ref Type	This field displays the order reference type entered for the purchase order line, which designates whether the line item is related to a sales order (S), a manufacturing order (M), or neither/none (N) in Costpoint. When entering the PO, make an entry in this field only when you expect to add an order reference number to the purchase order line.
Order Ref	This column displays the order reference number, which is a manufacturing order or internal sales order number that is assigned to the purchase order line. Note: When receiving a PO line that contains an order reference ID, an order reference type of M (manufacturing order), and the received quantity is greater than zero, the following warning message displays: "This PO line is for a subcontractor operation for Manufacturing Order [order reference ID]."
Notes	Enter notes for this inspection line.
Manufacturer Part	Enter the manufacturer part for this item. The manufacturer part entered on the PO receipt is the default value.
Manuf Rev	Enter the manufacturer revision for the manufacturer part. The manufacturer revision entered on the PO receipt is the default value.
Vendor Part	Enter the vendor part for this item. The vendor part entered on the PO receipt is the default value.
Vend Rev	Enter the vendor revision for the vendor part. The vendor revision entered on the PO receipt is the default value.
Ship ID	This field displays the Ship ID from the purchase order line.
Deliver To	This field displays the Deliver To from the purchase order line.
Desired Date	This field displays the Desired Date from the purchase order line.
Due Date	This field displays the Due Date from the purchase order line.
Total Receipt Line Amt	The calculated total receipt line amount displays in this field. Costpoint calculates the total receipt by multiplying the Received Quantity by the Net Unit Cost of the purchase order for the line item being accessed. This amount is not displayed if Cost Suppression is in effect for the user.
Auto-Accept	Click this button to automatically accept everything that was inspected for those lines that do not have a QC Insp Reqd of Y on the Manage Purchase Order Receipts screen .

Subtasks

Subtask	Description
PO Header Docs	Click this link to open the PO Header Documents subtask.
Rejection Info	Click this link to access the Rejection Info subtask, where you can enter information on any rejected quantity.
Serial/Lot Info	Click this link to access the Serial/Lot Info subtask, where you can enter information on inventory items that require tracking by serial number or lot number.
Fixed Assets	Click this link to access the Fixed Assets subtask.
Account Distribution	Click this link to access the Account Distribution subtask, where you can view detailed information about the PO line.
PO Line Text	Click this link to access the PO Line Text subtask, where you can view the standard text codes assigned to the PO line.
PO Line Documents	Click this link to open the PO Line Documents subtask, where you can view a list of documents associated with the selected PO line.
Part Documents	Click this link to access the Part Documents subtask, where you can view a list of documents associated with the item on the selected PO line.
Back Orders	Click this link to access the Back Orders subtask, where you can view back orders for the item being inspected.
Delivery Schedule	Click this link to access the Delivery Schedule subtask, where you can view multiple delivery dates for the item being inspected.