Web Client Installation

This section describes the installation process for the Maconomy web client. Keep in mind that parts of the installation process (in particular, web server configuration) are specific to the individual installation. As such, this section can only offer general guidelines.

The Maconomy Web Client Manifest

To install the web client, you need an installation of Maconomy and the latest version of MConfig. The web client product is packaged in an archive file format called a web client PU (Packing Unit). A web client PU contains the following components:

1. The Tools part which is a set of JavaScript, HTML and CSS files responsible for executing the web client applications in the browser.
2. The embedded web client applications, each consisting of a set of JSON files describing workspaces, layouts, and other settings for the web client against a particular range of Maconomy backends
3. The web client PU manifest (manifest.json) which specifies various metadata about the PU such as version info and compatibility constraints.

The web client is released with the rest of Maconomy, which makes it easy to identify the required backend Maconomy version for a given web client. You can also inspect the manifest.json file mentioned above. In the following manifest.json sample, we can see that this web client PU is of version 5.0.0. The application section lists the core Maconomy version with which this web client version is compatible. In this case, it is compatible with 2.6 (internally called 22).

{
  "manifest-version": 4,
  "maconomyVersion": {
    "external": {
      "major": 2,
      "minor": 6,
      "patch": 0,
      "cummulativeUpdate": 0
    },
    "internal": {
      "major": 22,
      "patch": 100,
      "cummulativeUpdate": 0
    }
  },
  "fpuVersion": {
    "major": 5,
    "minor": 0,
    "patch": 0
  },
  "apiVersion": {
    "major": 23,
    "minor": 0,
    "patch": 0
  },
  "application": {
    "requires": "~22.0.0",
    "src": "//depot/Releases/Navigator/Application/22/00/00/",
    "backend": {
      "tpu": {
        "version": "22.0.100",
        "cummulativeUpdate": 0
      },
      "apu": {
        "version": "22.0.100",
        "cummulativeUpdate": 0
      },
      "mconfig": {
        "version": "9.9"
      }
    }
  }
}

Once the Maconomy system is installed and configured, MConfig can install the web client PU on a web server of choice. MConfig will also install a web client application matching the Maconomy backend on the Maconomy server, specifically in the Web folder in MaconomyDir. We currently support IIS and Apache (see release notes for the specific version requirements for these web server products). On the web server, you should also set up a web site with the installed web client index.html in the root. Once the MConfig installation has taken place, and the web site and proxy settings have been completed, the web client is ready. Please observe that certain manual steps may be required for specific installations.

Security Considerations

While Deltek recommends the following procedures, ultimately each company is liable for its own security. The landscape evolves quickly, and each customer should continuously take internal measures to ensure its own security.

Regarding the use of HTTPS/TLS

Deltek best practice recommends that you configure web servers to use HTTPS (instead of HTTP). Using HTTPS/TLS encrypts your network traffic, making it difficult for anyone to access the credentials as they are passed to the web server. Using simple HTTP is tantamount to sending confidential information over the wire in clear text. The web client login page will display a warning message in case HTTP is used instead of HTTPS.

Address Risk of Clickjacking

To reduce the likelihood of clickjacking, Deltek suggests you follow the OWASP guidelines to defend against clickjacking attacks. Based on the OWASP guideline, you can perform additional steps when configuring your webserver. See Additional Related Procedures for more details.

Prerequisites

The following are prerequisites to installing the web client:

• Maconomy 2.6.4 with Standard Extensions installed
• Latest MConfig version
• Latest Extender version
• RESTful Web Services is enabled in the Coupling Service
• Web client downloaded from DSM, and the web client PU placed in the PUs folder (with the APU and TPU)
• If you are using Apache as the webserver, download the Apache binary package including OpenSSL, and install it from the following link: http://httpd.apache.org/

Additionally, this document assumes that you have already set up an application. For detailed instructions on setting up applications, see the Deltek Maconomy Installation Guide for your specific Maconomy version.

MConfig Installation

To begin installation with MConfig, complete the following steps:

Step 1 : In the MConfig Main Window, double-click the application to open. The Application Instance window displays as shown below.

Step 2 : Click OSGi products. The OSGi Server Selection screen appears as shown below.

Step 3 : In the OSGi Server Selection window, select the Coupling Service to update.

Step 4 : In the OSGi Products window, select the Enable RESTful Web Services check box as shown below.

Step 5 : Click OK to save, and click OK at the SSL warning to return to the Application Instance window. In the Application Instance window, click Web products as shown below.

Note: While you can click OK at the SSL warning, Deltek recommends you follow the steps listed in the warning to ensure the security of your system.

Step 6 : On the Web server selection screen, select the application to update, as shown below.

Step 7 : Select the Web client check box as shown below. In the Web Client FPU field, select the relevant web client PU from the dropdown list.

Step 8 : Click Ok a couple of times to return to the main window, and click Next a couple of times, and then click Yes to complete the MConfig installation.

Create a Website Using IIS

To create a website using IIS, you can enable IIS support automatically using MConfig, or perform the steps manually using IIS Manager.

Enabling IIS support with MConfig automatically completes the steps described under the manual installation. Use MConfig for the initial setup of a web client website using IIS. However, modifying the setup later should be done manually using IIS Manager.

Enable IIS Support Automatically Using MConfig

Automatic IIS configuration requires MConfig 9.9 or later. Previous version will not perform a correct configuration of IIS due to a shortcoming in MConfig. To enable IIS support using MConfig, follow these steps:

1. In MConfig, go to the Web Products window.
2. Select the Enable support for Web client check box and click OK.

Note: After you complete the initial installation with MConfig, you should check the setup in IIS Manager and possibly modify parameters, such as Web Server Port Number.

Note: If you enable IIS support automatically, MConfig also updates the IIS web.xml file with a routing rule that ensures login pages and other non-root URLs load properly.

Enable IIS Support Manually Using IIS Manager

After the web client has been installed on your IIS web server, you can configure it using IIS Manager.

Add the Site

: Connect to your server in the Internet Information Services (IIS) Manager application and setup the web client site.

Add MIME Types

: Click the "MIME Types" and ensure that the MIME Types below are defined

.json application/json
.woff application/font-woff
.woff2 application/font-woff

In IIS 8.0 and up, the .woff extension exists by default but with a different type. Change it to application/font-woff.

Proxy Setup

1. Install Microsoft Application Request Routing for IIS ARR.
2. Restart IIS Manager.
3. In the Application Request Routing configuration, click server proxy settings.
4. Check Enable proxy as shown in Figure @iis2.
5. Open URL Rewrite to add proxy rules for the container, configurations and filedrop APIs. Note: This must be done on the local site, not globally.

In IIS 8.0 and up, you will need to install the Web Platform Installer in order to install the ARR plugin.

Edit Routing Rules

To ensure that login pages (and other non-root URLs) load properly, open the IIS web.xml file and add the following rule before the other routing rules:

<rule name="DeepLinkingSupport" stopProcessing="false">
  <match url=".*" />
    <conditions logicalGrouping="MatchAll" trackAllCaptures="false">
      <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" />
      <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" />
      <add input="{REQUEST_FILENAME}" pattern="maconomy-api*" negate="true" />
    </conditions>
  <action type="Rewrite" url="/" />
</rule>

Note: If you want to install the web client in an IIS Application folder, you should update the rewrite action accordingly.

For example, if the IIS Application folder is called **webclient", then the rewrite action should be:

<action type="Rewrite" url="/webclient/" />

Add the server variable for Maconomy API

1. Click View Server Variables
2. Click Add...
3. Set the name: HTTP_Maconomy-Forwarded-Base-Path

Set up proxy for Maconomy API

1. Click Add Rule...
2. Select Blank rule.
3. Fill out the rule as shown in the section on setting up proxy for Maconomy API, specifically with the following parameters:

Match URL

Requested URL: Matches the Pattern
Using: Wildcards
Pattern: maconomy-api*
Ignore case: checked

Server Variables

Click Add...
Server variable name: HTTP_Maconomy-Forwarded-Base-Path
Value: maconomy-api

Action

Action type: Rewrite
Rewrite URL: http://<coupling-service-host>:<coupling-service-port>{R:1}
Append query string: checked

Preserve the Host Header

Open a console with Administrative privileges, and navigate to

C:\Windows\System32\inetsrv

Enable preserveHostHeader by running the following command:

cd C:\Windows\System32\inetsrv
appcmd.exe set config -section:system.webServer/proxy /preserveHostHeader:"True" /commit:apphost

Note: To preserve the spacing, copy the command and paste it in the command prompt.

Restart the web server.

See AppCmd reference for more details.

Set Up HTTPS

Open the Server Variables screen by clicking View Server Variables... in the URL Rewrite screen.

In the Server Variables screen, click Add... and add the variable HTTP_X_FORWARDED_PROTO as shown below.

In the URL rewrite rules (both containers, configurations, filedrop, auth, and environment) that proxies the web service, set the server variable HTTP_X_FORWARDED_PROTO to https as shown below.

Restart the webserver.

Note: It is not possible to run both HTTP and HTTPS on the same IIS site.

Create a Website Using Apache

Here is a short guide to setting up the web client on Apache (2.2 and 2.4)

Download Apache

Download the Apache 2.2 binary package including OpenSSL. Install it.

In httpd.conf, comment in the following modules:

LoadModule headers_module modules/mod_headers.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule rewrite_module modules/mod_rewrite.so

Comment in the inclusion: Include conf/extra/httpd-vhosts.conf

Comment out #Listen 80 (we will use the httpd-vhosts.conf file instead)

Enable compression

If using Apache 2.2, comment in the following module: LoadModule deflate_module modules/mod_deflate.so

If using Apache 2.4, use this module: LoadModule filter_module modules/mod_filter.so

Configure the compression:

<IfModule deflate_module>
  AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css text/javascript   application/javascript
  SetOutputFilter DEFLATE
  DeflateCompressionLevel 5
</IfModule>

See Apache Deflation Module for more information.

Setup with SSL

Here is a template for setting up a virtual host that serves webclient _with SSL. Copy contents into the httpd-vhosts.conf file, and replace the variables with the desired values. Please observe that the line Require all granted below is only required for Apache 2.4.

Listen <port>
<VirtualHost *:<port>>
    ServerName <server-name
    # Server web client files from installation directory
    DocumentRoot "<web-client-installation-directory>
    <Directory <web-client-installation-directory>>
       Order deny,allow
       Allow from all
       AllowOverride All
       Require all granted
    </Directory
    <Proxy *>
       Order deny,allow
       Allow from all
    </Proxy
    ProxyRequests      Off
    ProxyPreserveHost  O
    RequestHeader set Maconomy-Forwarded-Base-Path maconomy-api
    # Signal to the coupling service that the originating protocol is HTTPS
    RequestHeader set X-Forwarded-Proto "https
    # Proxy the web services from the coupling service
    ProxyPass  /maconomy-api  http://<coupling-service-host>:<coupling-service-web-port>  retry=
    # Set up this virtual host to use SSL
    SSLEngine              On
    SSLProxyEngine         On
    SSLCertificateFile     <crt-file-location>
    SSLCertificateKeyFile  <key-file-location>
</VirtualHost>

Edit Routing Rules

For more information, refer to Edit Routing Rules under the Enable IIS Support Manually Using IIS Manager section.

Verifying the setup

To quickly verify the setup, open a browser (such as Chrome) and navigate to the following URL:

https://<external-url-and-port>/maconomy-api

If the proxy configuration is correct, the browser should either download, or show an XML or JSON document that looks like the following:

{
  "timeInfo": {
    "time": "2022-07-11T07:38:13.667Z[UTC]",
    "zone": {
      "id": "UTC",
      "offset": {
        "id": "Z", "totalSeconds": 0
      }
    }
  },
  "versions": {
    "apu": {
      "major":"23",
  ...

Domain Login and Single Sign On

The domain login functionality in the web client is based on Kerberos service tickets obtained through the SPNEGO authentication protocol. This protocol allows direct Single Sign On (SSO) when the user is running the web client while already authenticated against the domain (that is, logged in to their computer via a domain account).

If the user is not authenticated against the domain, the browser typically prompts for domain credentials. Click Cancel in the browser login window and use the web client domain login page.

Browser Setup for Single Sign On

Refer to the instructions in this section to set up Single Sign On (SSO) for various browsers.

SSO Setup for Internet Explorer

For Internet Explorer (IE), you may need to add the web client server address to the Local intranet zone if it is not already in this zone, as IE does not permit Kerberos-based SSO for websites in the Internet zone.

More details are available in the "Client Side-Internet Explorer" section of the following Microsoft article about security zones in Internet Explorer:

https://msdn.microsoft.com/en-us/library/ms995329.aspx

SSO Setup for Chrome

You can choose one of two options:

• If using Windows, you can perform the setup required for Internet Explorer. Chrome can replicate the setup for IE.
• To configure Chrome to work with SSO using Kerberos authentication, follow the steps in the "Set Chrome policies for devices" guide (https://support.google.com/chrome/a/answer/187202?hl=en).

The configurations should be done by IT administrators who want to set Chrome policies on their corporate-managed devices. The templates contain hundreds of available policies that can be set, but you should only focus on two of these, namely:

AuthNegotiateDelegateWhitelist

AuthNegotiateDelegateWhitelist

and

AuthServerWhitelist

AuthServerWhitelist.

The properties should be set to the domain you want to authenticate against, such as:

"*. example.com ".

SSO Setup for Chrome on Windows

After following the preceding guide from Google, you can set AuthNegotiateDelegateWhitelist and AuthServerWhitelist as follows:

1. Navigate to Administrative Templates >> Classic Administration Templates (ADM) >> Google >> Google Chrome >> Policies for HTTP Authentication.
2. Click "Kerberos delegation server whitelist".
3. Click Enabled.
4. In the Input field, enter the domain you want to authenticate against, such as \*. example.com.
5. Click Apply.
6. Click on "Authentication server whitelist".
7. Click Enabled.
8. In the input field, enter the domain you want to authenticate against, such as \*. example.com.
9. Click Apply.
10. Open Chrome.
11. Check the values by navigating to the URL: chrome://policy

SSO Setup for Chrome on Mac

After following the preceding guide from Google, you should also read the Mac Quick Start guide from Google at:

http://www.chromium.org/administrators/mac-quick-start

If the "Workgroup Manager from Apple" is not available for your version of OS X, then you can set AuthNegotiateDelegateWhitelist and AuthServerWhitelist using one of two recipes.

By creating a com.google.Chrome.plist file:

1. Create com.google.Chrome.plist file with the following content:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN"     "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
  <dict>
    <key>AuthNegotiateDelegateWhitelist</key>
    <string>*.example.com</string>
    <key>AuthNegotiateDelegateWhitelist</key>
    <string>*.example.com</string>
  </dict>
</plist>

2. Set the two string attributes to the domain you want to authenticate against.
3. Convert the com.google.Chrome.plist to the binary format by running the following command from the Terminal:

plutil -convert binary1 com.google.Chrome.plist

4. Copy the file to "/Library/Managed Preferences/" by running the following command from the Terminal:

sudo -s
cp com.google.Chrome.plist /Library/Managed Preferences/<username>

5. Open Chrome.
6. Check the values by navigating to the following URL: chrome://policy

By using the "defaults" command:

1. Run the following commands:

defaults write com.google.Chrome AuthServerWhitelist "*.example.com"
defaults write com.google.Chrome AuthNegotiateDelegateWhitelist "*.example.com"

2. Open Chrome.

3. Check the values by navigating to the following URL: chrome://policy

   Or by using the following command:

defaults read com.google.Chrome

Note that using the "defaults" command only sets the "AuthServerWhitelist" and "AuthNegotiateDelegateWhitelist" Chrome properties for the current user.

SSO Setup for Safari

No setup is needed.

SSO Setup for iOS

Follow the steps in the following guide:

https://samuelyates.wordpress.com/2013/10/11/kerberos-single-sign-on-in-ios-7/

Remember to put your own servername on the URLPrefixMatches field. As the name implies, this has to contain a URL prefix. This could be https://myserver.example.com:8080, so basically this will be set to the base server URL including an optional port number.

You can use Apple Configurator 2 to install the profile on a number of iPads:

https://itunes.apple.com/us/app/apple-configurator-2/id1037126344

SSO Setup for Firefox

Complete the following steps:

1. In the location bar, type: about:config

   This brings up the configuration page.

2. In the Filter:box, type: negotiate.

   This restricts the listing to the configuration options you need.

3. Edit network.negotiate-auth.trusted-uris to the domain against which you want to authenticate. For instance: ".".example.com

Domain Controller Setup

The SPNEGO authentication protocol works by assuming the presence of a specific Service Principal Name (SPN) on the domain controller:

HTTP/name.domain or HTTP/name

where name and domain are the web server DSN name and domain respectively, as seen from the user's computer.

For example, if the user is opening the web client using the internet address https://some-server.some-domain.com, then the browser expects one of the following SPNs to be present on the domain controller:

HTTP/some-server or HTTP/some-server.some-domain.com.

SPN Setup

It is a task for the domain administrator to ensure that these SPNs are created and associated with the existing domain account used for Maconomy SSO.

SSO with Active Directory

For Active Directory, associating SPNs with the existing domain account is done with the 'setspn' command.

To associate SPN with an existing domain account, complete the following step:

On a command line enter the following:

setspn -A HTTP/name account
setspn -A HTTP/name.domain account

where account is the name of the domain account used for Maconomy SSO.

Special Instructions for SPN Conflicts

If the web client is installed on a web server that already hosts other web applications with SNEGO authentication, this causes a conflict on the SPN, as an SPN can only be associated with one domain account.

To resolve the issue, either install only one web application on each web server, or create multiple local DNS names for the web server, so that each web application can be accessed through different addresses and will map to different SPNs.

Maconomy Server Setup

Please refer to the Single Sign On with Kerberos section in the Deltek Maconomy System Administrator Guide.

Timeout Settings

Server Timeout

To customize server timeout settings, open the Maconomy server Maconomy.ini file and edit the value for the following setting:

DB_Cancellation_DefaultTimeout=300

The default value is 300 seconds.

User Idle Timeout

Maconomy sessions expire after a certain period of user inactivity. To customize this setting, open the Maconomy server Maconomy.ini file and edit the value for the following setting:

RPC_UserIdleTimeout=1200

The default time is 1200 seconds.

Additional Related Procedures

Displaying System Information on the Web Client Interface

You can display the system name along the top margin of your web client installation. For details on how to configure this, refer to the Displaying System Information on Clients section in the Deltek Maconomy System Administrator Guide.

Configure Web Server to Reduce Risk of Clickjacking

You can reduce the risk of clickjacking by performing an additional step when configuring your web server. This step applies to both Apache and IIS.

To configure your web server and reduce the risk of clickjacking, complete the following step:

Configure your web server to always reply with the following response headers:

Content-Security-Policy: frame-ancestors 'self'
X-Frame-Options: SAMEORIGIN

These headers are then added to all responses.

Export the List of Dialogs Required for Workspace Access

The Dialog Group Imports tool allows you to quickly extract the list of dialogs to which the web client requires access. The tool can extract a list either by workspace (installed on the system) or by user role (defined by the web client menu). This list is exported as a text file that can then be imported into Maconomy.

Access the Dialog Group Imports Tool

The Dialog Group Imports tool requires you to log in before you can access and use it.

To access the tool after logging in:

1. On the web client login screen, log in as usual.

2. In the address bar, replace “workspace/[workspace name]” with “tools” and then press ENTER.

   Maconomy loads the tool on the current browser tab.

3. Go to the Dialog Group Imports tab.

Export Dialog List by Workspace

Use these steps to export a dialog list for workspaces.

To export a dialog list by workspace:

1. In the Dialog Group Imports tab, select the By workspace option.

2. If needed, select the Include reference workspaces checkbox.

3. On the lefthand side, select all the workspaces for which you need dialog lists. As you select each workspace, the righthand side automatically lists the dialogs for that workspace.

4. Once you have selected all the workspaces you need, click Export.

   Maconomy downloads the export text file to your local storage.

5. To go back to the web client, click the X on the top right corner of the screen.

Export Dialog List by Role

Use these steps to export a dialog list for roles.

To export a dialog list by role:

1. In the Dialog Group Imports tab, select the By role option.

2. If needed, select the Include reference workspaces checkbox.

3. On the lefthand side, select all the roles for which you need dialog lists. As you select each role, the righthand side automatically lists the dialogs for that role.

4. Once you have selected all the roles you need, click Export.

   Maconomy downloads the export text file to your local storage.

5. To go back to the web client, click the X on the top right corner of the screen.

Import Dialog List

Use these steps to import a dialog list text file into your Maconomy system.

To import a dialog list:

1. Once logged in to your web client application, go to Setup » Import » Simple Import.

2. In the Import Program field, select Import Groups from the dropdown.

3. Click Save.

4. Click Import.

5. In the Import wizard that displays, click Select files to open your file explorer window.

6. Select the text file you want to import, then click Open.

7. Click Ok.

   Maconomy lists the import program in the table. After a moment (or if you refresh your screen), the Import Status field on the line should display the value Success.