Asset Management allows you to define the types of depreciation methods that are required for managing your organization's assets. Vision defaults to using the straight-line method, however, you can add other methods and their respective calculations as needed.
You configure the types of depreciation on the Methods tab in
. These are configured by how the costs of assets are distributed, either based on time or use and using a regular or accelerated rate.
If you use Vision Multicompany, you must run depreciation processing separately for each company. Depreciation only applies to assets that belong to the active company.
Refer to the following examples for calculating depreciation with fixed assets:
- Straight-line — Use this method to calculate depreciation based on the cost of the asset being reduced by an equal amount in each accounting period. This occurs over the asset's useful life. Straight-line depreciation is frequently used when the asset's usability remains static regardless of its age.
For example, if an asset's value is $20,000.00, the useful life is 4 years, and the expected value at the end is $5000, the depreciation is $3,750. This is calculated as follows:
| Criteria
|
Calculation
|
| Asset's value
|
$20,000
|
| Useful life
|
4 years
|
| Expected value at end of cycle
|
$5,000
|
| Depreciable amount = $15,000
|
$20,000 - $5,000
|
| Yearly depreciation = $3750
|
$15,000 / 4
|
-
Sum of the years' digits — Use this accelerated depreciation method when assuming that the asset is more productive when it is new. In other words, the depreciation is greater in the earlier years of the asset's useful life and less in the later years. However, the total amount of depreciation over the asset's useful life does not change.
Sum of years' digits uses the following calculation for depreciation:
Depreciable base x (Remaining useful life / Sum of years digits).
For example, a piece of radiology equipment is purchased for $160,000, the useful life is 5 years, and the expected valued at the end is $10,000. Because the equipment will be sold at the end of five years for $10,000, the total depreciable cost is $150,000.
The digits of the years are summed. 1 + 2 + 3 + 4 + 5 =
15. The sum of the years is then used in the calculation as follows:
| Year
|
Depreciation Amount per Year
|
| 1
|
5/15 of $150,000 =
$50,000
|
| 2
|
4/15 of $150,000 =
$40,000
|
| 3
|
3/15 of $150,000 =
$30,000
|
| 4
|
2/15 of $150,000 =
$20,000
|
| 5
|
1/15 of $150,000 =
$10,000
|
| Sum
|
$150,000
|