Use this screen to specify default inventory abbreviations for a given parent part/inventory abbreviation combination. You can load a multi-level Bill of Material (BOM) at one time, but pegging will be done at the parent/child level.
Use this as needed to tie assembly BOMs to default inventory abbreviations.
Enter, or use Lookup to select, the ID of the assembly or parent part whose BOM is to be viewed. A description of the part selected displays in the untitled field below this field.
Enter the revision of the assembly or parent part whose BOM is to be viewed.
Enter the top assembly's build inventory abbreviation.
Use the radio buttons in this group box to choose whether to load the first-level components of the assembly, the entire assembly BOM through all the levels, or an indented assembly BOM through a specified number of levels.
Select this radio button to load only the first-level components of this assembly. This is the system default.
Select this radio button to load the entire assembly BOM through all the levels.
Select this radio button to load the BOM through a specified number of levels, entered in the adjacent field.
Use the options in this group box to view the BOM for all configurations, for a specific configuration, or for a specific date.
Select this checkbox to see the components for all configurations/effectivity dates of the parent part. This option is available only if you have selected the Single-Level radio button in the BOM Levels group box. If this checkbox is unchecked, the display will be based on the As of Date and the Config ID.
Enter the BOM component effectivity date. The system will load only those lines with effective starting and ending dates corresponding to the as-of date. If the Effective Ending Date field is blank, all lines will load. This field is disabled if you selected the Show All Configs checkbox.
Enter, or use Lookup to select, the BOM configuration ID for selective component viewing. This field is active if you selected the Use Configuration IDs checkbox in the BOM Corporate Settings subtask of the BOM Settings screen in Costpoint Bills of Material; it will be disabled if you selected the Show All Configs checkbox in this screen.
If you enter a configuration ID, the display depends on whether that configuration ID appears on a given component line. If a line exists with the entered configuration ID, that line will display. If no line exists with the entered configuration ID, but there is a line without a configuration ID, the line without a configuration ID will display. If a line cannot be found that contains either the entered configuration ID or an empty configuration ID field, no line will display.
Use Lookup to view the range of assembly serial numbers with their associated configurations and as-of dates (the Maintain End Item Configurations screen in Costpoint Bills of Material). If you select a row in Lookup, the system will load the proper configuration and/or as-of date. Effectivity is established by configuration IDs and as-of dates only.
Enter the default make part's build inventory abbreviation to load.
Enter the default buy part's build inventory abbreviation to load.
Enter the default common stock part's build inventory abbreviation to load.
Use this pushbutton to load the BOM of the assembly with the default inventory abbreviations.
This column displays the BOM level of the component part.
This column displays the line number identifying the specific BOM component line.
This column displays the drawing find number used for this BOM component line.
This column displays the component part ID.
This column displays the component part rev.
This column displays the component part description.
This column displays "M" (Make) or "B" (Buy) depending on whether or not the component is a make or buy part.
This column displays the default make or buy part inventory abbreviation as entered in the Assembly group box, but it can be changed if necessary.
This column displays the project ID associated with the entered inventory abbreviation.
This column displays "Y" (Yes) or "N" (No) depending on whether or not the selected project is a common inventory project.
This column displays the inventory abbreviation name.
This column displays the project name.
This column displays the component type code. Available codes are: "B" (Buy with components), "S" (Standard), "P" (Phantom), "R" (Reference), and "T" (Tool).
This column displays "Y" (Yes) or "N" (No) depending on whether or not the component is a common stock part.
This column displays the component quantity type code. Available codes are: "A" (Per Assembly), "R" (As Required), and "O" (Per Order).
This column displays the quantity required of the BOM component part.
This column displays the inventory unit of measure of the component part.
This column displays the configuration ID of the BOM component part.
This column displays the configuration description.
This column displays the starting effective date for this component part.
This column displays the ending effective date for this component part.
This column displays "Y" (Yes) or "N" (No) depending on whether or not the component has been released.