Use this screen to specify default inventory abbreviations for a given parent part/inventory abbreviation combination. You can load all of a multilevel BOM at one time, but pegging will be done at the parent/child level.
Use this screen as needed to tie assembly BOMs to default inventory abbreviations.
Enter, or use Lookup to select, the ID of the assembly or parent part whose BOM is to be viewed. The unlabeled field below displays a description of the part selected.
Enter the revision of the assembly or parent part for which you would like to view the BOM.
Enter the top assembly's build inventory abbreviation.
Use the radio buttons in this group box to choose whether to load the first-level components of the assembly, the entire assembly BOM through all the levels, or an indented assembly BOM through a specified number of levels.
Select this radio button to load only the first-level components of this assembly.
Select this radio button to load the entire assembly BOM through all the levels.
Select this radio button to load the BOM through a specified number of levels, entered in the adjacent field.
Use the options in this group box to view the BOM for all configurations, for a specific configuration, or for a specific date.
Select this checkbox to view the components for all configurations/effective dates of the parent part. This option is available only if you selected the Single-Level radio button in the BOM Levels group box. If you do not select this checkbox, the display will be based on the as-of date and the configuration ID entered.
Enter the effective date for the BOM component. The system will load only those lines with effective starting and ending dates corresponding to the as-of date. If the Effective Ending Date field is blank, the second criterion is ignored. This field is disabled if you selected the Show All Configs checkbox.
Enter, or use Lookup to select, the BOM configuration ID for selective component viewing. This field is active if you selected the Use Configuration IDs checkbox in the BOM Corporate Settings subtask of the BOM Settings screen in Costpoint Bills of Material; it will be disabled if you selected the Show All Configs checkbox in this screen.
If you enter a configuration ID, the display depends on whether that configuration ID appears on a given component line. If a line exists with the entered configuration ID, that line will display. If no line exists with the entered configuration ID, but there is a line without a configuration ID, the line without a configuration ID will display. If a line cannot be found that contains either the entered configuration ID or an empty Configuration ID field, no line will display.
Use Lookup to view the range of assembly serial numbers with their associated configurations and as-of dates (the Maintain End Item Configurations screen in Costpoint Bills of Material). If you choose a row in Lookup, the system will display the proper configuration and/or as-of date. Effectiveness is established only by configuration IDs and as-of dates.
Enter the default build inventory abbreviation of the buy part.
Enter the default build inventory abbreviation for the purchased part.
Enter the default build inventory abbreviation for the common stock.
Use this pushbutton to load the BOM for the assembly with the default inventory abbreviations.
This field displays the BOM level of the component part.
This field displays the line number identifying the specific BOM component line.
This field displays the find number of the drawing used for this BOM component line.
This field displays the component part ID.
This field displays the component part revision level.
This field displays the component part description.
This field displays "M" (Make) or "B" (Buy) depending on whether or not the component is a manufactured or purchased part.
This field displays the default make or buy part inventory abbreviation as entered in the Default Inventory Abbreviations group box, but can be changed if necessary.
This field displays the project ID associated with the inventory abbreviation entered.
This field displays "Y" (Yes) or "N" (No) depending on whether or not the selected project is a common inventory project.
This field displays the inventory abbreviation name.
This field displays the project name.
This field displays the component type code. Available codes are "B" (Buy with components), "S" (Standard), "P" (Phantom), "R" (Reference), and "T" (Tool).
This field displays "Y" (Yes) or "N" (No) depending whether or not the component is a common stock part.
This field displays the component quantity type code. Available codes are "A" (Per Assembly), "R" (As Required), and "O" (Per Order).
This field displays the quantity required of the BOM component part.
This field displays the inventory unit of measure of the component part.
This field displays the configuration ID of the BOM component part
This field displays the configuration description.
This field displays the starting effective date for this component part.
This field displays the ending effective date for this component part.
This field displays "Y" (Yes) or "N" (No) depending on whether or not the component has been released.