Use this subtask to view materials planning information for the part on the header entered in the main screen header. The MRP and MPS processes use this information to determine how a given parts should be planned. This information can be edited using the Planning Part Data screen in the Product Definition module.
This field displays the part ID for the part selected on the main screen. The part description displays in the unlabeled field below this one.
This field displays the part revision number.
This field displays the part's default or inventory unit of measure.
This field displays "M" (Make) or "B" (Buy), depending on whether the part is typically manufactured or purchased.
This field displays the planning type for this part:
(None)—The part has not been assigned a planning method.
MRP—The part will be planned by the Materials Requirement Planning process.
Reorder—The part will be planned using the Inventory reorder Report.
MPS— The part will typically be planned by the Master Production Scheduling process, but can be planned by MRP if the Plan MPS Part Requirements option is checked in MRP Settings.
The order policy type represents the lot-sizing technique to be used for this part:
Discrete Lot Size—This type has the MPS/MRP processes set the planned order quantity equal the quantity of the net requirements.
Min/Mult Lot Size—This type requires that the order quantity meet the minimum and multiple lot sizes specified for the part.
Order to Point—The Inventory Reorder Process will automatically place a purchase requisition for this part whenever the inventory quantity is less than or equal to the reorder point. It will order the quantity necessary to bring the quantity up to the Order to Point quantity. The Order to Point and Reorder Point are defined in the Part Project Data screen in Product Definition screen.
Period—This type requires that the lot size equal net requirements for the specified number of calendar or shop days.
Reorder Point—The Inventory Reorder Process will automatically place a purchase requisition for this part whenever the quantity on hand is reduced to or below a specified level (reorder point level). The Reorder quantity field in Planning Part Data will be used to as the requisition’s order quantity. The Order to Point and Reorder Point are defined in the Part Project Data screen in Product Definition screen.
This field displays the part type, such as "MPS Planning-Only," "Reference," "Standard," or "Tool." Part types are defined in the Basic Part Data screen of Product Definition.
This field displays the minimum lot size for specifying that the order will always be at least equal to the specified lot size when meeting net requirements.
This field displays the multiple lot size for specifying that the order is always a multiple of the specified lot size when meeting net requirements. For instance, a Multiple Quantity of 200 means that quantities of 200, 400, etc. are eligible to be ordered on an order.
This field displays the maximum quantity that can be placed in any one order. If the order quantity is greater than the maximum quantity, it will be split into several orders, each not exceeding the maximum quantity.
If "Period" is displayed in the Order Policy field, this field displays the number of calendar or shop days for which MPS will combine net requirements to create an order.
This field displays the estimate of what percentage of these parts will be accidentally destroyed, lost, or otherwise rendered unusable when used as a component in a manufacturing order. This scrap percentage can be overridden at the manufacturing bill of material level.
This field displays the percentage of losses that can be expected during the manufacturing, or assembly or purchasing of this part.
This field displays the default planner assigned to the part for planning purposes.
This field displays the default buyer assigned to the part for procurement purposes.
This field displays the total lead time that is calculated in the Part Lead Time subtask of the Planning Part Data screen (in Costpoint Product Definition).
This quantity is used as the MPS time fence only if the MPS Settings – MPS Time Fence Method is set to "Use Part Lead Time."
This field displays the total lead time, including component and subassembly lead times, required to complete this part. This number is maintained on the Master Production Schedule Data subtask in the Product Definition Planning Part Data screen.
This quantity is used as the MPS time fence only if the MPS Settings – MPS Time Fence Method is set to “Use Part Cumulative Lead Time."
This field displays the number of days, prior to the sales order line’s ship date, in which modifications to sales order quantities and dates should not be made. The number of days within the time fence is maintained on the Master Production Schedule Data subtask in the Product Definition Planning Part Data screen.
The MPS time fence is intended to limit changes to the production schedule within a specified amount of time in the future. The number of days within the time fence is maintained on the Master Production Schedule Data subtask in the Product Definition Planning Part Data screen.
This quantity is used as the MPS time fence only if the MPS Settings – MPS Time Fence Method is set to “Use Part Time Fence."
The Costpoint tables impacted are listed in the following table:
|
Screens |
Tables |
|
Product Family |
PART
|